Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Mechanical · Air Terminals · Grilles

Exhaust air grille, rectangular neck connection

Library name: Exhaust air grill (connect face)

ID IBIM-M-ART-EXHAUST-AIR-GRILL-CONNECT-FACE-R25 · file IBIM-M-ART-Exhaust air grill (connect face)-R25.rfa

Revit
2025
Types
1
Hosting
Not hosted (placed on a level)
Connectors
1
Revit category
Air Terminals

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

This family has one type: EAG 350x200.

Parameters of type “EAG 350x200”

40 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

1 parameter of the file for authorship or contact details (author, website, e-mail and similar) is not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Dimensions
Chiều cao hộp gió0.0mmInstanceYes
Chiều dài350.0mmTypeYes
Chiều rộng200.0mmTypeYes
l1140.0mmInstanceNoSet by a formula in the family
Length conect310.0mmInstanceNoSet by a formula in the family
Ri150.0mmInstanceYes
w1290.0mmInstanceNoSet by a formula in the family
Width conect160.0mmInstanceNoSet by a formula in the family
Graphics
Visible connectorYesYes / NoTypeYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
DescriptionNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerNo valueTextTypeYes
Model350x200TextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Mechanical - Flow
Lưu lượng446.00 L/sL/sInstanceYes
Max Flow84.44 L/sL/sTypeYes
Min FlowNo valueL/sTypeYes
Pressure20.000000 PaPaInstanceYes
Other
AYesYes / NoInstanceNoSet by a formula in the family
aNoYes / NoInstanceNoSet by a formula in the family
So nan theo L6Whole numberInstanceNoSet by a formula in the family
So nan theo W4Whole numberInstanceNoSet by a formula in the family
Số lá van3Whole numberInstanceNoSet by a formula in the family
Số mũi tên3Whole numberInstanceNoSet by a formula in the family
Ẩn chiều hút ngangNoYes / NoInstanceYes
Ẩn chiều hút đứngNoYes / NoInstanceYes
Ẩn cổ nối mềmNoYes / NoTypeYes
Ẩn hộp gióYesYes / NoInstanceYes
Ẩn nan 1YesYes / NoInstanceYes
Ẩn nan 2YesYes / NoInstanceYes
Ẩn van OBDNoYes / NoTypeYes
Text
Loại cửa sharedNo valueTextTypeYes
Van OBD sharedNo valueTextInstanceYes
Vị trí lắp sharedNo valueTextInstanceYes

Category, hosting and compatibility

Revit category
Air Terminals
Catalogue classification
Mechanical › Air Terminals › Grilles
Hosting
Not hosted (placed on a level)
Connectors
  • Duct, rectangular 310 x 160 mm, exhaust air
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
2 solid forms, 8 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    1 type(s), 41 parameter(s), 1 connector(s) before and after. 0 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-M-ART-Exhaust air grill (connect face)-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Air Terminals.

  • Passed
    Has a connector to join a system

    1 connector(s): Duct, rectangular 310 x 160 mm, exhaust air.

  • Passed
    Types are named

    1 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-M-ART-Exhaust air grill (connect face)-R25.rfa
Fingerprint
fbaae2b21eb7 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
880 KB
History
Upgraded from the Revit 2019 format. 0 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “EAG 350x200”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.