Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Mechanical · Mechanical Equipment · Fans and blowers

Ceiling Fan

ID IBIM-M-MEC-CEILING-FAN-R25 · file IBIM-M-MEC-Ceiling Fan-R25.rfa

Revit
2025
Types
2
Hosting
Not hosted (placed on a level)
Connectors
1
Revit category
Mechanical Equipment

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

8 parameters out of 94 have a different value in at least one type.

Parameter8 ft Fan Diameter (A)10 ft Fan Diameter (A)
Fan Radius feet fractional inches4' - 0"5' - 0"
Actual Fan Diameter feet fractional inches8' - 0"10' - 0"
Fan Blade Length feet fractional inches3' - 3 1/2"4' - 3 1/2"
Diameter Type12
Fan Diameter feet fractional inches8' - 0"10' - 0"
Fan Weight lb81.00 lb88.00 lb
Maximum Speed120 RPM80 RPM
ModelIS08IS10

Parameters of type “10 ft Fan Diameter (A)”

94 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

5 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0' - 0"feet fractional inchesTypeYes
Construction
Diameter Type2Whole numberTypeYes
Fan ConfigurationPlease Confirm Configuration With Cut SheetTextTypeNoSet by a formula in the family
Power ConnectorPower ConnectionTextTypeNoSet by a formula in the family
Dimensions
Extension Tube Length1' - 0"feet fractional inchesInstanceYes
Extension Tube Length Options2 ft to 15 ft (0.61 m to 4.6 m)TextTypeNoSet by a formula in the family
Fan Diameter10' - 0"feet fractional inchesTypeNoSet by a formula in the family
Fan Height4' - 3 115/128"feet fractional inchesTypeNoSet by a formula in the family
Fan Weight88.00 lblbTypeNoSet by a formula in the family
Standard Extension Tube Length1' - 0"feet fractional inchesTypeNoSet by a formula in the family
Electrical
Power Factor shared1.000000generalTypeYes
Voltage shared0.00 VVTypeYes
Electrical - Loads
Apparent Load shared0.00 VAVATypeYes
Full Load Amps3.9/2.4 ATextTypeNoSet by a formula in the family
Input Power and Required Breaker110–125 VAC, 60 Hz, 1 Phase, 10 A 200–250 VAC, 50 Hz, 1 Phase, 10 ATextTypeNoSet by a formula in the family
Maximum Speed80 RPMTextTypeYes
General
Date of publishing shared3/4/2019TextTypeYes
Design country sharedUnited StatesTextTypeYes
Edition number shared1Whole numberTypeYes
Manufacturer country sharedUnited StatesTextTypeYes
Manufacturer name sharedBig Ass FansTextTypeYes
Nominal height shared0' - 0"feet fractional inchesTypeYes
Nominal width shared0' - 0"feet fractional inchesTypeYes
Product family sharedCeiling FanTextTypeYes
Product group shared8 BladeTextTypeYes
Product SKU sharedBig-Ass-Fans-8-Ft-Isis-8-BladeTextTypeYes
Region Africa sharedNoneTextTypeYes
Region Antarctica sharedNoneTextTypeYes
Region Asia sharedNoneTextTypeYes
Region Europe sharedNoneTextTypeYes
Region Middle East sharedNoneTextTypeYes
Region North America sharedUSTextTypeYes
Region Oceania sharedNoneTextTypeYes
Region South America sharedNoneTextTypeYes
Weight Net (Kg) shared0TextTypeYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
DescriptionNo valueTextTypeYes
GTIN code sharedNo valueTextTypeYes
Installation instructions sharedNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerBig Ass FansTextTypeNoSet by a formula in the family
ModelIS10TextTypeYes
Product certification sharedNo valueTextTypeYes
Product Guid shared9c85af74-688c-451d-a0ca-1e7157c05d56TextTypeYes
Technical description sharedNo valueTextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
Youtube clip sharedNo valueTextTypeYes
IFC Parameters
BIMobject category sharedMechanical VentilationTextTypeYes
BIMobject category code sharedhvac-mechTextTypeYes
BIMobject main category sharedHVACTextTypeYes
BIMobject main category code sharedhvacTextTypeYes
COBIe Type Category sharedNo valueTextTypeYes
Export Type to IFC AsNo valueTextTypeYes
IFC Classification sharedFanTextTypeYes
Masterformat 2014 Code shared43 11 26TextTypeYes
Masterformat 2014 Description sharedAxial FansTextTypeYes
NBS Reference Code sharedNo valueTextTypeYes
NBS Reference Description sharedNo valueTextTypeYes
OmniClass Code shared23-33 31 19TextTypeYes
OmniClass Description sharedFansTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Uniclass 1.4 Code sharedNo valueTextTypeYes
Uniclass 1.4 Description sharedNo valueTextTypeYes
Uniclass 2.0 Code sharedNo valueTextTypeYes
Uniclass 2.0 Description sharedNo valueTextTypeYes
Uniclass 2015 Code sharedNo valueTextTypeYes
Uniclass 2015 Name sharedNo valueTextTypeYes
Uniformat II Code sharedNo valueTextTypeYes
Uniformat II Description sharedNo valueTextTypeYes
UNSPSC Code shared40101604TextTypeYes
Materials and Finishes
Airfoil FinishClear anodized aluminumTextTypeNoSet by a formula in the family
Material main sharedNo valueTextTypeYes
Material secondary sharedNo valueTextTypeYes
Motor MaterialNo valueMaterialTypeYes
Standard Color OptionsBoron,Carbon,Cobalt,Palladium,Chromium,Gold,Krypton,Tungsten,RadiumTextTypeNoSet by a formula in the family
SupportNo valueMaterialTypeYes
UnitNo valueMaterialTypeYes
Winglet StandardSilver or blackTextTypeNoSet by a formula in the family
Other
Actual Extension Tube Length1' - 0"feet fractional inchesInstanceNoSet by a formula in the family
Actual Fan Diameter10' - 0"feet fractional inchesTypeNoSet by a formula in the family
Fan Blade Length4' - 3 1/2"feet fractional inchesTypeNoSet by a formula in the family
Fan Radius5' - 0"feet fractional inchesTypeNoSet by a formula in the family
Text
CertificationsETL/Intertek certified to ANSI/UL 507 and CSA C22.2 No. 113TextTypeNoSet by a formula in the family
Clearance Required Below the Ceiling Deck2 ft (0.61 m) Below Ceiling Deck depending on Fan diameterTextTypeNoSet by a formula in the family
Clearance Required on Above10 ft (3.05 m)Above floorTextTypeNoSet by a formula in the family
Clearance Required on Sides2 ft (0.61 m) On SidesTextTypeNoSet by a formula in the family
ControllerIsis wall switch (white)TextTypeNoSet by a formula in the family
Fan Weight NoteFan Weight Not Including Mount or Extension TubeTextTypeNoSet by a formula in the family
Number and Type of Airfoils8 patented airfoilsTextTypeNoSet by a formula in the family
Prime MoverGearless direct drive motorTextTypeNoSet by a formula in the family
Sound Level at Max Speed< 35 dBATextTypeNoSet by a formula in the family
Warranty7-yr mechanical, 3-yr (standard) or 7-yr (extended) electrical, 1-yr laborTextTypeNoSet by a formula in the family

Category, hosting and compatibility

Revit category
Mechanical Equipment
Catalogue classification
Mechanical › Mechanical Equipment › Fans and blowers
Hosting
Not hosted (placed on a level)
Connectors
  • Electrical, power - balanced
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
5 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2022 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    2 type(s), 99 parameter(s), 1 connector(s) before and after. 22 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-M-MEC-Ceiling Fan-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Mechanical Equipment.

  • Passed
    Connectors

    1 connector(s) found.

  • Passed
    Types are named

    2 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-M-MEC-Ceiling Fan-R25.rfa
Fingerprint
6cca2ee9b93f first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
1384 KB
History
Upgraded from the Revit 2022 format. 22 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “10 ft Fan Diameter (A)”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.