Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Mechanical · Mechanical Equipment · Pumps

Sinker Pump

ID IBIM-M-MEC-SINKER-PUMP-R25 · file IBIM-M-MEC-Sinker Pump-R25.rfa

Revit
2025
Types
8
Hosting
Not hosted (placed on a level)
Connectors
2
Revit category
Mechanical Equipment

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

1 parameter out of 57 have a different value in at least one of the 8 types. Choose a type above to see its values.

ParameterValue in Bơm hố gaDifferent values across the types
R_OUT16.000 mm2

Parameters of type “Bơm hố ga”

57 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

4 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
1.5" DischargeYesYes / NoInstanceNoSet by a formula in the family
2" DischargeNoYes / NoInstanceYes
Default Elevation0.000mmTypeYes
Dimensions
Base Bottom Offset40.640mmTypeYes
Discharge Nominal Diameter1 1/2""InstanceNoSet by a formula in the family
Height shared510.540mmTypeYes
Length shared284.480mmTypeYes
Pump Housing Height419.100mmTypeYes
R_OUT16.000mmTypeYes
Width shared187.960mmTypeYes
Electrical
Apparent Load shared0.00 VAVATypeYes
Cord Length7620.000mmTypeYes
Full Load Current shared14.00 AATypeYes
ImpellerCast IronTextTypeYes
Load ClassificationNo valueLoad classificationTypeYes
Number of Poles shared1Whole numberTypeYes
Phase shared1Whole numberTypeYes
Power Factor shared0.900000generalTypeYes
Pump HP shared0.50 VAVATypeYes
Thermal Overload248.00 °F°FTypeYes
Voltage shared115.00 VVTypeYes
Identity Data
Assembly CodeD3040TextTypeYes
CostNo valuecurrencyTypeYes
DescriptionXFL50 Series. 1⁄2 HP Submersible Effluent Pump. For Hazardous Locations. Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIBTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerLiberty Pumps Inc.TextTypeYes
ModelXFL51M-2TextTypeNoSet by a formula in the family
Product Name sharedXFL51M-2TextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Materials and Finishes
Handle MaterialNo valueMaterialTypeYes
Highlight MaterialNo valueMaterialTypeYes
Pump MaterialNo valueMaterialTypeYes
Mechanical
Discharge Flow0.000 GPMGPMInstanceYes
Pump Head shared0.000 psipsiInstanceYes
Other
Base Height60.960mmTypeYes
Bolt Radius5.080mmTypeYes
Connection Height137.160mmInstanceNoSet by a formula in the family
Discharge Body Radius29.210mmTypeNoSet by a formula in the family
Discharge Nominal Radius3/4""InstanceNoSet by a formula in the family
Feet Bottom Width31.750mmTypeYes
Feet Top Width57.150mmTypeYes
Flange Radius45.720mmTypeYes
Handle Depth12.700mmTypeYes
Handle Width25.400mmTypeYes
Length 118.991mmTypeNoSet by a formula in the family
Length 2113.151mmTypeNoSet by a formula in the family
Length 36.350mmTypeNoSet by a formula in the family
Length 45.080mmTypeNoSet by a formula in the family
Length 55.080mmTypeNoSet by a formula in the family
Length 633.020mmTypeNoSet by a formula in the family
Offset0.000mmTypeYes
Pump Housing Diameter172.720mmTypeNoSet by a formula in the family
Pump Housing Radius86.360mmTypeNoSet by a formula in the family
Symbol Radius142.240mmTypeNoSet by a formula in the family

Category, hosting and compatibility

Revit category
Mechanical Equipment
Catalogue classification
Mechanical › Mechanical Equipment › Pumps
Hosting
Not hosted (placed on a level)
Connectors
  • Electrical, power - balanced
  • Pipe, round 32 mm, sanitary
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
17 solid forms, 2 voids, 4 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    8 type(s), 61 parameter(s), 2 connector(s) before and after. 2 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-M-MEC-Sinker Pump-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Mechanical Equipment.

  • Passed
    Connectors

    2 connector(s) found.

  • Passed
    Types are named

    8 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-M-MEC-Sinker Pump-R25.rfa
Fingerprint
744e83011546 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
888 KB
History
Upgraded from the Revit 2019 format. 2 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “Bơm hố ga”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.