Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Fire Protection · Fire Fighting System · Pipe fittings

Steel Transition Threaded

ID IBIM-P-FFS-STEEL-TRANSITION-THREADED-R25 · file IBIM-P-FFS-Steel Transition Threaded-R25.rfa

Revit
2025
Types
1
Hosting
Not hosted (placed on a level)
Connectors
2
Revit category
Pipe Fittings

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

This family has one type: Standard.

Parameters of type “Standard”

47 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

5 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Dimensions
DSC_Fitting Outside Diameter 160.3 mmmmInstanceNoSet by a formula in the family
DSC_Fitting Outside Diameter 248.3 mmmmInstanceNoSet by a formula in the family
DSC_Length50.0 mmmmInstanceNoSet by a formula in the family
DSC_Nominal Diameter 150.0 mmmmInstanceNoSet by a formula in the family
DSC_Nominal Diameter 240.0 mmmmInstanceNoSet by a formula in the family
DSC_Nominal Radius 125.0 mmmmInstanceYes
DSC_Nominal Radius 220.0 mmmmInstanceYes
DSC_Socket Depth 119.1 mmmmInstanceNoSet by a formula in the family
DSC_Socket Depth 217.4 mmmmInstanceNoSet by a formula in the family
DSC_Socket Entrance Diameter 160.7 mmmmInstanceNoSet by a formula in the family
DSC_Socket Entrance Diameter 248.6 mmmmInstanceNoSet by a formula in the family
DSC_Socket Outside Diameter 168.6 mmmmInstanceNoSet by a formula in the family
DSC_Socket Outside Diameter 256.6 mmmmInstanceNoSet by a formula in the family
DSC_Tick Size 124.1 mmmmInstanceNoSet by a formula in the family
DSC_Tick Size 219.3 mmmmInstanceNoSet by a formula in the family
DSC_Wall Thickness 14.0 mmmmInstanceNoSet by a formula in the family
DSC_Wall Thickness 24.0 mmmmInstanceNoSet by a formula in the family
OffsetHeight25.0000 mmmmInstanceYes
OffsetWidth25.0000 mmmmInstanceYes
Graphics
Use Annotation ScaleNo valueYes / NoInstanceYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
DescriptionNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerDSCons Viet Nam Company LimitedTextTypeNoSet by a formula in the family
ModelNo valueTextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Mechanical
K CoefficientNo valuegeneralTypeYes
K Coefficient TableNo valueTextTypeYes
Loss MethodNo valueWhole numberTypeYes
Other
DSC_Fitting Outside Radius 130.2 mmmmInstanceNoSet by a formula in the family
DSC_Fitting Outside Radius 224.1 mmmmInstanceNoSet by a formula in the family
DSC_Height Offset3048.0 mmmmInstanceNoSet by a formula in the family
DSC_Lookup Table NameM_Reducer - PVC - Sch 40 - DWVTextTypeYes
DSC_Max Nominal Diameter 1250.0 mmmmInstanceNoSet by a formula in the family
DSC_Min Nominal Diameter 1240.0 mmmmInstanceNoSet by a formula in the family
DSC_Socket Outside Radius 134.3 mmmmInstanceNoSet by a formula in the family
DSC_Socket Outside Radius 228.3 mmmmInstanceNoSet by a formula in the family
DSC_Visibility 1NoYes / NoInstanceNoSet by a formula in the family
DSC_Visibility 2YesYes / NoInstanceNoSet by a formula in the family
DSC_Visibility 3NoYes / NoInstanceNoSet by a formula in the family
DSC_Width Offset3048.0 mmmmInstanceNoSet by a formula in the family
IsCustomNo valueYes / NoInstanceYes

Category, hosting and compatibility

Revit category
Pipe Fittings
Catalogue classification
Fire Protection › Fire Fighting System › Pipe fittings
Hosting
Not hosted (placed on a level)
Connectors
  • Pipe, round 40 mm, fitting
  • Pipe, round 50 mm, fitting
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
6 solid forms, 3 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    1 type(s), 52 parameter(s), 2 connector(s) before and after. 15 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-FFS-Steel Transition Threaded-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Pipe Fittings.

  • Passed
    Connectors

    2 connector(s) found.

  • Passed
    Types are named

    1 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-FFS-Steel Transition Threaded-R25.rfa
Fingerprint
af046bfd9ba1 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
476 KB
History
Upgraded from the Revit 2019 format. 15 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “Standard”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.