Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Pipe Accessories · Other valves

Balancing Valve Threaded DN15 50

ID IBIM-P-PIA-BALANCING-VALVE-THREADED-DN15-50-R25 · file IBIM-P-PIA-Balancing Valve Threaded DN15 50-R25.rfa

Revit
2025
Types
8
Hosting
Not hosted (placed on a level)
Connectors
2
Revit category
Pipe Accessories

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

25 parameters out of 89 have a different value in at least one of the 8 types. Choose a type above to see its values.

ParameterValue in DN20 (1 4017 02)Different values across the types
Size20mm6
DSC_Test Point Height22.8 mm6
DSC_Test 2 Offset31.5 mm2
DSC_Test 1 Offset24.0 mm2
DSC_Pipe Radius10.0 mm6
DSC_Large HandleNo2
DSC_Hex Thickness11.0 mm6
DSC_Hex Ext Radius15.5 mm6
DSC_Hex Diameter32.0 mm6
DSC_Hex Body Ext10.0 mm6
DSC_Body Radius14.4 mm6
DSC_Angle Start43.5 mm6
DSC_Angle Radius13.5 mm6
DSC_Angle Length38.6 mm6
Pipe Size20.0 mm6
DSC_L2135.0 mm6
DSC_L191.0 mm6
DSC_H2115.0 mm6
DSC_H199.0 mm6
DSC_Type48
ModelNumber1 4017 028
Order Number1 4017 028
K Coefficient3.950000 general8
DSC_Hex 8No2
DSC_Hex 6Yes2

Parameters of type “DN20 (1 4017 02)”

89 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

10 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
DSC_Angle Length38.6mmTypeNoSet by a formula in the family
DSC_Angle Radius13.5mmTypeNoSet by a formula in the family
DSC_Angle Start43.5mmTypeNoSet by a formula in the family
DSC_Body Radius14.4mmTypeNoSet by a formula in the family
DSC_Hex Body Ext10.0mmTypeNoSet by a formula in the family
DSC_Hex Diameter32.0mmTypeNoSet by a formula in the family
DSC_Hex Ext Radius15.5mmTypeNoSet by a formula in the family
DSC_Hex Thickness11.0mmTypeNoSet by a formula in the family
DSC_Large HandleNoYes / NoTypeNoSet by a formula in the family
DSC_Pipe Radius10.0mmTypeNoSet by a formula in the family
DSC_Test 1 Offset24.0mmTypeNoSet by a formula in the family
DSC_Test 2 Offset31.5mmTypeNoSet by a formula in the family
DSC_Test Point Centre24.0mmTypeNoSet by a formula in the family
DSC_Test Point Height22.8mmTypeNoSet by a formula in the family
DSC_Test Point Radius10.0mmTypeNoSet by a formula in the family
Construction
Has Compression Fitting sharedNoYes / NoInstanceYes
Data
Maximum Operating Pressure shared20 bar at 20 °CTextTypeNoSet by a formula in the family
Maximum Operating Temperature shared130 °C at 10 barTextTypeNoSet by a formula in the family
Pressure Rating sharedPN16TextTypeNoSet by a formula in the family
Suitable Pipe Applications sharedNo valueTextTypeYes
Dimensions
DSC_D70.0mmTypeNoSet by a formula in the family
DSC_H199.0mmTypeNoSet by a formula in the family
DSC_H2115.0mmTypeNoSet by a formula in the family
DSC_L191.0mmTypeNoSet by a formula in the family
DSC_L2135.0mmTypeNoSet by a formula in the family
DSC_M25.0mmTypeNoSet by a formula in the family
Pipe Size shared20.0mmTypeNoSet by a formula in the family
General
AssetType sharedFixedTextTypeNoSet by a formula in the family
BarCode sharedNo valueTextTypeYes
DSC_Type4Whole numberTypeYes
DurationUnit sharedYearsTextTypeNoSet by a formula in the family
ExpectedLife shared0Whole numberTypeYes
Extidentifier sharedNo valueTextTypeYes
InstallationDate sharedNo valueTextInstanceYes
ModelNumber shared1 4017 02TextTypeNoSet by a formula in the family
ReplacementCost sharedNo valueTextTypeYes
SerialNumber sharedNo valueTextInstanceYes
SpareParts sharedNo valueTextTypeYes
TagNumber sharedNo valueTextTypeYes
TypeName sharedHerz DPCVTextTypeNoSet by a formula in the family
WarrantyDescription sharedNo valueTextTypeYes
WarrantyDurationLabor sharedNo valueTextTypeYes
WarrantyDurationParts sharedNo valueTextTypeYes
WarrantyDurationUnit sharedYearsTextTypeNoSet by a formula in the family
WarrantyGuarantorLabor sharedNo valueTextTypeYes
WarrantyGuarantorParts sharedNo valueTextTypeYes
WarrantyStartDate sharedNo valueTextInstanceYes
Graphics
DSC_Body MaterialNo valueMaterialTypeYes
DSC_Handle MaterialNo valueMaterialTypeYes
Use Annotation ScaleNo valueYes / NoInstanceYes
Identity Data
Assembly CodeD30TextTypeYes
CostNo valuecurrencyTypeYes
DescriptionThe HERZ 4017 DZR combined regulating and measuring valve has an integral orifice incorporated into the valve casting. Available in sizes from DN15 to DN50, ½” to 2”, with BSP female threaded ends to BS21 and manufactured to BS 7350. The valve is also available in Low Flow and Medium Flow DN15 versions. The commissioning valve has hidden regulating and locking functions.TextTypeNoSet by a formula in the family
DSC_No valueTextInstanceYes
KeynoteS51TextTypeNoSet by a formula in the family
ManufacturerHerz Valves UK LtdTextTypeNoSet by a formula in the family
ModelHerz Double Regulating ValveTextTypeNoSet by a formula in the family
Order Number shared1 4017 02TextTypeNoSet by a formula in the family
Type CommentsHerz DPCVTextTypeNoSet by a formula in the family
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Mechanical
Flow shared0.00 L/sL/sTypeYes
K Coefficient3.950000generalTypeNoSet by a formula in the family
K Coefficient TableNo valueTextTypeYes
Loss MethodNo valueWhole numberTypeYes
Model Properties
_BIMspec_GUID shared0Whole numberTypeYes
_current revision shared1Whole numberTypeNoSet by a formula in the family
Other
AccessibilityPerformance sharedNo valueTextTypeYes
AssetIdentifier sharedNo valueTextInstanceYes
ClassificationName sharedUniclass 2015TextTypeNoSet by a formula in the family
ClassificationValue sharedPr_65_54_95_26TextTypeNoSet by a formula in the family
CodePerformance sharedNo valueTextTypeYes
Color sharedNo valueTextTypeYes
Constituents sharedNo valueTextTypeYes
DocumentationCertificates sharedNo valueTextTypeYes
DocumentationInstallationGuide sharedNo valueTextTypeYes
DocumentationMaintenance sharedNo valueTextTypeYes
Features sharedNo valueTextTypeYes
Finish sharedNo valueTextTypeYes
Grade sharedNo valueTextTypeYes
Material sharedBrassTextTypeNoSet by a formula in the family
ProductionYear shared2015TextTypeNoSet by a formula in the family
ReferencedStandard sharedNo valueTextTypeYes
Shape sharedNo valueTextTypeYes
Size shared20mmTextTypeNoSet by a formula in the family
Visibility
DSC_Hex 6YesYes / NoTypeNoSet by a formula in the family
DSC_Hex 8NoYes / NoTypeNoSet by a formula in the family

Category, hosting and compatibility

Revit category
Pipe Accessories
Catalogue classification
Plumbing › Pipe Accessories › Other valves
Hosting
Not hosted (placed on a level)
Connectors
  • Pipe, round 20 mm, fitting × 2
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
4 solid forms, 8 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    8 type(s), 99 parameter(s), 2 connector(s) before and after. 55 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PIA-Balancing Valve Threaded DN15 50-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Pipe Accessories.

  • Passed
    Has a connector to join a system

    2 connector(s): Pipe, round 20 mm, fitting x 2.

  • Passed
    Types are named

    8 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PIA-Balancing Valve Threaded DN15 50-R25.rfa
Fingerprint
b8487369e9aa first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
2460 KB
History
Upgraded from the Revit 2019 format. 55 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “DN20 (1 4017 02)”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.