Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Pipe Accessories · Check valves

Swing Check Valve Flanged DN50 300

ID IBIM-P-PIA-SWING-CHECK-VALVE-FLANGED-DN50-300 · file IBIM-P-PIA-Swing Check Valve Flanged DN50 300-R25.rfa

Revit
2025
Types
9
Hosting
Not hosted (placed on a level)
Connectors
2
Revit category
Pipe Accessories

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

41 parameters out of 98 have a different value in at least one of the 9 types. Choose a type above to see its values.

ParameterValue in 50mmDifferent values across the types
TypeName50mm Cast Iron Check Valve9
Size50mm9
ModelNumberHV5153-079
DSC_small arrowYes2
DSC_logo smalllYes2
DSC_large logoNo2
DSC_large arrowNo2
DSC__Flange Raised Face Height3.0 mm2
DSC__Flange Raised Face Diameter99.0 mm9
DSC__Flange Hole Diameter19.0 mm4
DSC__Flange Hole Centres125.0 mm9
DSC__Body Radius100.0 mm9
DSC__Body Centre23.0 mm9
DSC__Top of Stem75.0 mm9
DSC_Hinge Pin Radius14.7 mm9
DSC_Hinge Pin Length117.7 mm9
DSC_Hinge Pin Centre Offset25.1 mm9
DSC_Connection Size Radius25.0 mm9
DSC_Cover Disk Depth16.1 mm9
DSC_Body Width163.0 mm9
DSC_Cover Disc Size154.9 mm9
DSC_Body Vertical Radius58.8 mm9
DSC_Body Square Height37.7 mm9
DSC_Body Square Depth60.5 mm9
DSC_Body Globe Offset13.5 mm9
DSC_Body Edge Radius55.0 mm9
DSC_Arrow Offset76.0 mm9
DSC_Flange_8No2
DSC_Flange_4Yes2
DSC_Flange_12No2
Weight14.000000 general9
E mm113.0 mm9
D mm153.0 mm9
Connection Size50.0 mm9
C mm20.0 mm6
B mm165.0 mm9
A mm203.0 mm9
Type Comments50mm Cast Iron Check Valve9
Order NumberHV5153-079
K Coefficient114.000000 general9
DSC_Type19

Parameters of type “50mm”

98 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

10 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
DSC__Body Centre23.0mmTypeYes
DSC__Body Radius100.0mmTypeYes
DSC__Flange Hole Centres125.0mmTypeYes
DSC__Flange Hole Diameter19.0mmTypeYes
DSC__Flange Raised Face Diameter99.0mmTypeYes
DSC__Flange Raised Face Height3.0mmTypeYes
DSC__Top of Stem75.0mmTypeYes
DSC_Arrow Offset76.0mmTypeYes
DSC_Body Edge Radius55.0mmTypeNoSet by a formula in the family
DSC_Body Globe Offset13.5mmTypeNoSet by a formula in the family
DSC_Body Square Depth60.5mmTypeNoSet by a formula in the family
DSC_Body Square Height37.7mmTypeNoSet by a formula in the family
DSC_Body Vertical Radius58.8mmTypeNoSet by a formula in the family
DSC_Body Width163.0mmTypeNoSet by a formula in the family
DSC_Connection Size Radius25.0mmTypeNoSet by a formula in the family
DSC_Cover Disc Size154.9mmTypeNoSet by a formula in the family
DSC_Cover Disk Depth16.1mmTypeNoSet by a formula in the family
DSC_Hinge Pin Centre Offset25.1mmTypeNoSet by a formula in the family
DSC_Hinge Pin Length117.7mmTypeNoSet by a formula in the family
DSC_Hinge Pin Radius14.7mmTypeNoSet by a formula in the family
DSC_large arrowNoYes / NoTypeNoSet by a formula in the family
DSC_large logoNoYes / NoTypeNoSet by a formula in the family
DSC_logo smalllYesYes / NoTypeYes
DSC_small arrowYesYes / NoTypeNoSet by a formula in the family
Construction
DSC_Flange_12NoYes / NoTypeYes
DSC_Flange_4YesYes / NoTypeYes
DSC_Flange_8NoYes / NoTypeYes
Data
Maximum Operating Pressure shared120°CTextTypeNoSet by a formula in the family
Minimum Operating Temperature shared-10°CTextTypeNoSet by a formula in the family
Pressure Rating sharedPN16TextTypeNoSet by a formula in the family
Suitable Pipe Applications sharedCast Iron/Stainless SteelTextTypeNoSet by a formula in the family
Weight shared14.000000generalTypeYes
Dimensions
A mm shared203.0mmTypeYes
B mm shared165.0mmTypeYes
C mm shared20.0mmTypeYes
Connection Size shared50.0mmTypeYes
D mm shared153.0mmTypeYes
E mm shared113.0mmTypeYes
Graphics
Use Annotation ScaleNo valueYes / NoInstanceYes
Identity Data
Assembly CodeD30TextTypeYes
CostNo valuecurrencyTypeYes
DescriptionCast Iron Check Valve PN16TextTypeNoSet by a formula in the family
DSC_No valueTextInstanceYes
KeynoteS90/660TextTypeNoSet by a formula in the family
ManufacturerHerz Valves UK LtdTextTypeNoSet by a formula in the family
ModelCast Iron Check Valve PN16TextTypeNoSet by a formula in the family
Order Number sharedHV5153-07TextTypeNoSet by a formula in the family
Type Comments50mm Cast Iron Check ValveTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Materials and Finishes
DSC_Valve MaterialNo valueMaterialTypeYes
Mechanical
K Coefficient114.000000generalTypeYes
K Coefficient TableNo valueTextTypeYes
Loss Method2Whole numberTypeYes
Model Properties
_BIMspec_GUID shared0Whole numberTypeYes
_current revision shared1Whole numberTypeNoSet by a formula in the family
NBSObjectName sharedCast iron check valvesTextTypeNoSet by a formula in the family
NBSReference shared90-10-90/348TextTypeNoSet by a formula in the family
Other
AccessibilityPerformance sharedNo valueTextTypeYes
AssetIdentifier sharedPlease record at commissioningTextInstanceYes
AssetType sharedFixedTextTypeNoSet by a formula in the family
BarCode sharedPlease record at commissioningTextInstanceYes
ClassificationName sharedUniclass2015TextTypeNoSet by a formula in the family
ClassificationValue sharedPr_65_54_95_11TextTypeNoSet by a formula in the family
CodePerformance sharedNo valueTextTypeYes
Color sharedBlueTextTypeNoSet by a formula in the family
Constituents sharedNo valueTextTypeYes
DocumentationCertificates sharedNo valueTextTypeYes
DocumentationInstallationGuide sharedNo valueTextTypeYes
DocumentationMaintenance sharedNo valueTextTypeYes
DurationUnit sharedYearsTextTypeNoSet by a formula in the family
ExpectedLife shared25Whole numberTypeNoSet by a formula in the family
Extidentifier sharedNo valueTextTypeYes
Features sharedNo valueTextTypeYes
Finish sharedCast Iron - PaintedTextTypeNoSet by a formula in the family
Grade sharedNo valueTextTypeYes
InstallationDate sharedPlease record at commissioningTextInstanceYes
Material sharedCast IronTextTypeNoSet by a formula in the family
ModelNumber sharedHV5153-07TextTypeNoSet by a formula in the family
ProductionYear shared2015TextTypeNoSet by a formula in the family
ReferencedStandard sharedBS5153 and BS EN 12334TextTypeNoSet by a formula in the family
ReplacementCost sharedNo valueTextTypeYes
SerialNumber sharedPlease record at commissioningTextInstanceYes
Shape sharedNo valueTextTypeYes
Size shared50mmTextTypeYes
SpareParts sharedNo valueTextTypeYes
TagNumber sharedNo valueTextTypeYes
TypeName shared50mm Cast Iron Check ValveTextTypeNoSet by a formula in the family
WarrantyDescription sharedParts OnlyTextTypeNoSet by a formula in the family
WarrantyDurationLabor sharedNoneTextTypeNoSet by a formula in the family
WarrantyDurationParts shared5 YearsTextTypeNoSet by a formula in the family
WarrantyDurationUnit sharedYearsTextTypeNoSet by a formula in the family
WarrantyGuarantorLabor sharedNoneTextTypeNoSet by a formula in the family
WarrantyGuarantorParts shared5 YearsTextTypeNoSet by a formula in the family
WarrantyStartDate sharedDate of Delivery to siteTextInstanceYes
Visibility
DSC_Type1Whole numberTypeYes

Category, hosting and compatibility

Revit category
Pipe Accessories
Catalogue classification
Plumbing › Pipe Accessories › Check valves
Hosting
Not hosted (placed on a level)
Connectors
  • Pipe, round 50 mm, supply hydronic × 2
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
4 solid forms, 11 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    9 type(s), 108 parameter(s), 2 connector(s) before and after. 15 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PIA-Swing Check Valve Flanged DN50 300-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Pipe Accessories.

  • Passed
    Has a connector to join a system

    2 connector(s): Pipe, round 50 mm, supply hydronic x 2.

  • Passed
    Types are named

    9 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PIA-Swing Check Valve Flanged DN50 300-R25.rfa
Fingerprint
fa03dba680e7 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
2736 KB
History
Upgraded from the Revit 2019 format. 15 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “50mm”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.