Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Pipe Fittings · Other fittings

Gate Valve

ID IBIM-P-PIF-GATE-VALVE-R25 · file IBIM-P-PIF-Gate Valve-R25.rfa

Revit
2025
Types
6
Hosting
Not hosted (placed on a level)
Connectors
2
Revit category
Pipe Accessories

7 checks passed, 1 warning. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

19 parameters out of 35 have a different value in at least one type.

ParameterDN20DN25DN32DN40DN50DN63
Haft Axis Outside Diameter mm15.018.724.029.937.347.0
Band mm0.80.80.91.21.41.5
Handle Diameter mm55.062.073.088.0105.0118.0
Handle Length 1 mm9.010.011.013.017.018.5
Handle Length 2 mm12.515.620.025.031.339.4
Handle Length 3 mm2.02.53.24.05.06.3
Handle Radius 1 mm2.22.42.63.74.24.6
Handle Radius 2 mm4.34.85.37.38.49.2
Handle Radius 3 mm6.57.27.911.012.713.8
Handle Radius 4 mm8.69.610.514.616.918.4
Void Diameter mm11.012.015.016.018.020.0
Nominal Diameter mm20.025.032.040.050.063.0
Outside Diameter mm26.833.442.853.466.684.0
Inside Diameter mm20.025.032.040.050.063.0
Valve Length mm65.072.080.0100.0115.0130.0
Conector Length mm14.516.018.020.523.527.5
Circle Radius mm18.823.430.037.446.658.8
Axis Outside Diameter mm30.037.447.959.874.694.1
Thickness mm3.44.25.46.78.310.5

Parameters of type “DN50”

35 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

1 parameter of the file for authorship or contact details (author, website, e-mail and similar) is not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Dimensions
Axis Outside Diameter74.6mmTypeNoSet by a formula in the family
Circle Radius46.6mmTypeNoSet by a formula in the family
Conector Length23.5mmTypeYes
Inside Diameter50.0mmTypeYes
Nominal Diameter50.0mmTypeYes
Outside Diameter66.6mmTypeNoSet by a formula in the family
Thickness8.3mmTypeYes
Valve Length115.0mmTypeYes
Graphics
Use Annotation ScaleNo valueYes / NoInstanceYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
DescriptionNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerIBIM GroupTextTypeNoSet by a formula in the family
ModelNo valueTextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Materials and Finishes
MaterialNo valueMaterialTypeYes
Mechanical
K CoefficientNo valuegeneralTypeYes
K Coefficient TableNo valueTextTypeYes
Loss MethodNo valueWhole numberTypeYes
Other
Band1.4mmTypeYes
Haft Axis Outside Diameter37.3mmTypeNoSet by a formula in the family
Handle Diameter105.0mmTypeYes
Handle Length 117.0mmTypeYes
Handle Length 231.3mmTypeNoSet by a formula in the family
Handle Length 35.0mmTypeNoSet by a formula in the family
Handle Radius 14.2mmTypeNoSet by a formula in the family
Handle Radius 28.4mmTypeNoSet by a formula in the family
Handle Radius 312.7mmTypeNoSet by a formula in the family
Handle Radius 416.9mmTypeNoSet by a formula in the family
Void Diameter18.0mmInstanceYes

Category, hosting and compatibility

The Revit category differs from the catalogue classification. The library lists this family under “Pipe Fittings”; in a Revit project it behaves as “Pipe Accessories” for schedules, tags, filters and visibility. This is reported for review. The family was not changed.

Revit category
Pipe Accessories
Catalogue classification
Plumbing › Pipe Fittings › Other fittings
Hosting
Not hosted (placed on a level)
Connectors
  • Pipe, round 50 mm, fitting × 2
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
3 solid forms, 2 voids, 4 nested families

What was checked

7 passed, 1 warning, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025 and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    6 type(s), 36 parameter(s), 2 connector(s) before and after. 25 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PIF-Gate Valve-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Warning
    Revit category matches the catalogue classification

    Listed under 'Pipe Fittings', but the family's Revit category is 'Pipe Accessories'. It will schedule, tag and filter as Pipe Accessories in a project. Reported for review; the family was not changed.

  • Passed
    Has a connector to join a system

    2 connector(s): Pipe, round 50 mm, fitting x 2.

  • Passed
    Types are named

    6 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PIF-Gate Valve-R25.rfa
Fingerprint
f39c1762fc55 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
724 KB
History
25 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “DN50”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.