Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Plumbing Fixtures · Bathroom fixtures

Accessory Toilet Paper

ID IBIM-P-PLM-ACCESSORY-TOILET-PAPER-R25 · file IBIM-P-PLM-Accessory Toilet Paper-R25.rfa

Revit
2025
Types
1
Hosting
Face-based
Connectors
0
Revit category
Plumbing Fixtures

7 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

This family has one type: 40367DA1.

Parameters of type “40367DA1”

84 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

11 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Construction
DSC_PaperRollNoYes / NoInstanceYes
Data
ADACompliant sharedNoYes / NoTypeYes
Ecojoy sharedNoYes / NoTypeYes
IndustryStandards sharedn/aTextTypeYes
LEEDCredit sharedn/aTextTypeYes
LowEmittingMaterial sharedNoYes / NoTypeYes
MasterformatNumber shared22 41 39TextTypeYes
MasterformatTitle sharedResidential Faucets, Supplies, and TrimTextTypeYes
PercentageOfRecycledContent sharedn/aTextTypeYes
Dimensions
DSC_Height68.0mmTypeYes
DSC_Length167.0mmTypeYes
DSC_Width121.0mmTypeYes
Identity Data
Assembly CodeC1030220TextTypeYes
Cost0.00currencyTypeYes
DescriptionEssentials - Toilet paper holder with coverTextTypeYes
DSC_No valueTextInstanceYes
KeynoteN13TextTypeYes
ManufacturerGrohe LimitedTextTypeYes
ModelEssentials Toilet paper holderTextTypeYes
Type Comments40367DA1TextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsIfcPipeFittingTextTypeYes
IfcExportAs sharedIfcPipeFittingTextTypeYes
IfcExportType sharedIfcPipeFittingTypeTextTypeYes
NominalDepth shared121.0mmTypeYes
NominalHeight shared68.0mmTypeYes
NominalLength shared167.0mmTypeYes
Type IFC Predefined TypeIfcPipeFittingTypeTextTypeYes
Materials and Finishes
DSC_PrimaryMaterialNo valueMaterialTypeYes
DSC_ToiletPaperNo valueMaterialTypeYes
Mechanical
CWFUNo valuegeneralTypeYes
HWFUNo valuegeneralTypeYes
WFUNo valuegeneralTypeYes
Model Properties
_BimSpecGuid shared0Whole numberTypeYes
_BSBibleVersion shared14Whole numberTypeYes
_CurrentRevision shared1Whole numberTypeYes
BIMObjectName sharedFurniture_GroheLimited_EssentialsToiletPaperHolder_40367000_METRICTextTypeYes
NBSDescription sharedToilet roll holdersTextTypeYes
NBSNote sharedNo valueTextTypeYes
NBSObjectName sharedGrohe Limited - Toilet roll holdersTextTypeYes
NBSOfficeMasterTag sharedn/aTextTypeYes
NBSReference shared45-35-72/368TextTypeYes
Other
AccessibilityPerformance sharedn/aTextTypeYes
AssetIdentifier sharedPlease Record On Commissioning.TextInstanceYes
AssetType sharedFixedTextTypeYes
BarCode sharedPlease Record On Commissioning.TextInstanceYes
ClassificationName sharedUniclass2015TextTypeYes
ClassificationValue sharedPr_40_20_76_88TextTypeYes
CodePerformance sharedn/aTextTypeYes
Color sharedWarm SunsetTextTypeNoSet by a formula in the family
Constituents sharedn/aTextTypeYes
DocumentationCertificates sharedn/aTextTypeYes
DocumentationInstallationGuide sharedn/aTextTypeYes
DocumentationLiterature sharedn/aTextTypeYes
DocumentationMaintenance sharedn/aTextTypeYes
DocumentationTechnical sharedn/aTextTypeYes
DurationUnit sharedYearsTextTypeYes
ExpectedLife shared0Whole numberTypeYes
Features sharedEssentials - Toilet paper holder with coverTextTypeNoSet by a formula in the family
Finish sharedWarm SunsetTextTypeNoSet by a formula in the family
Grade sharedn/aTextTypeYes
InstallationDate sharedPlease Record On Commissioning.TextInstanceYes
ManufacturerName sharedGrohe LimitedTextTypeYes
Material sharedWarm SunsetTextTypeYes
ModelNumber shared40367DA1TextTypeNoSet by a formula in the family
ModelReference sharedEssentials Toilet paper holderTextTypeNoSet by a formula in the family
ProductionYear shared2017TextTypeYes
ReferencedStandard sharedn/aTextTypeYes
ReplacementCost sharedn/aTextTypeYes
SerialNumber sharedPlease Record On Commissioning.TextInstanceYes
Shape sharedn/aTextTypeYes
Size sharedn/aTextTypeYes
SpareParts sharedn/aTextTypeYes
TypeName sharedEssentials Toilet paper holderTextTypeNoSet by a formula in the family
WarrantyDescription sharedn/aTextTypeYes
WarrantyDurationLabor sharedn/aTextTypeYes
WarrantyDurationParts sharedn/aTextTypeYes
WarrantyDurationUnit sharedYearsTextTypeYes
WarrantyStartDate sharedPlease Record On Commissioning.TextInstanceYes
Plumbing
CW ConnectionNo valueYes / NoTypeYes
HW ConnectionNo valueYes / NoTypeYes
Vent ConnectionNo valueYes / NoTypeYes
Waste ConnectionNo valueYes / NoTypeYes

Category, hosting and compatibility

Revit category
Plumbing Fixtures
Catalogue classification
Plumbing › Plumbing Fixtures › Bathroom fixtures
Hosting
Face-based
Connectors
None found
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
6 solid forms, 2 voids, 3 nested families

What was checked

7 passed, 6 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    1 type(s), 95 parameter(s), 0 connector(s) before and after. 30 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PLM-Accessory Toilet Paper-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Plumbing Fixtures.

  • Not checked
    Connectors

    None found. This kind of family does not need one.

  • Passed
    Types are named

    1 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PLM-Accessory Toilet Paper-R25.rfa
Fingerprint
c680ebae2746 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
552 KB
History
Upgraded from the Revit 2019 format. 30 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “40367DA1”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.