Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Plumbing Fixtures · Drains

Roof Drain Dome

ID IBIM-P-PLM-ROOF-DRAIN-DOME-R25 · file IBIM-P-PLM-Roof Drain Dome-R25.rfa

Revit
2025
Types
11
Hosting
Not hosted (placed on a level)
Connectors
1
Revit category
Plumbing Fixtures

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

13 parameters out of 32 have a different value in at least one of the 11 types. Choose a type above to see its values.

ParameterValue in DN80Different values across the types
Nominal Diameter80.0 mm10
O80.0 mm11
H130.0 mm5
H275.0 mm3
C120.0 mm10
Small20.0 mm10
Haft O40.0 mm11
Top Radius22.5 mm11
Top Height73.5 mm5
Top Thickness4.5 mm11
T3.0 mm5
Height Circle58.0 mm5
Width Circle56.0 mm11

Parameters of type “DN80”

32 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

2 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Dimensions
C120.0mmTypeYes
H130.0mmTypeYes
H275.0mmTypeYes
Haft O40.0mmTypeNoSet by a formula in the family
Height Circle58.0mmTypeYes
Nominal Diameter80.0mmTypeYes
O80.0mmTypeYes
Small20.0mmTypeNoSet by a formula in the family
T3.0mmTypeYes
Top Height73.5mmTypeYes
Top Radius22.5mmTypeYes
Top Thickness4.5mmTypeYes
Width Circle56.0mmTypeYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
DescriptionNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerPTSTextTypeNoSet by a formula in the family
ModelR31TextTypeNoSet by a formula in the family
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Materials and Finishes
MaterialNo valueMaterialTypeYes
Mechanical
CWFUNo valuegeneralTypeYes
HWFUNo valuegeneralTypeYes
WFUNo valuegeneralTypeYes
Plumbing
CW ConnectionNo valueYes / NoTypeYes
HW ConnectionNo valueYes / NoTypeYes
Vent ConnectionNo valueYes / NoTypeYes
Waste ConnectionNo valueYes / NoTypeYes

Category, hosting and compatibility

Revit category
Plumbing Fixtures
Catalogue classification
Plumbing › Plumbing Fixtures › Drains
Hosting
Not hosted (placed on a level)
Connectors
  • Pipe, round 80 mm, fitting
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
2 solid forms, 4 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    11 type(s), 34 parameter(s), 1 connector(s) before and after. 0 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PLM-Roof Drain Dome-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Plumbing Fixtures.

  • Passed
    Connectors

    1 connector(s) found.

  • Passed
    Types are named

    11 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PLM-Roof Drain Dome-R25.rfa
Fingerprint
c5085f92b554 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
612 KB
History
Upgraded from the Revit 2019 format. 0 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “DN80”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.