Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Plumbing Fixtures · Drains

Roof Drain Standard

ID IBIM-P-PLM-ROOF-DRAIN-STANDARD-R25 · file IBIM-P-PLM-Roof Drain Standard-R25.rfa

Revit
2025
Types
1
Hosting
Face-based
Connectors
1
Revit category
Plumbing Fixtures

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

This family has one type: DN150.

Parameters of type “DN150”

69 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

8 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation1219.2mmTypeYes
Dimensions
Nominal Diameter shared150.0mmTypeYes
General
Date of publishing sharedNo valueTextTypeYes
Design country sharedUnited StatesTextTypeYes
Edition number shared1Whole numberTypeYes
Manufacturer country sharedNo valueTextTypeYes
Manufacturer name sharedZurn IndustriesTextTypeYes
Nominal height shared0.0mmTypeYes
Nominal width shared0.0mmTypeYes
Product family sharedRoof Waste Water DrainsTextTypeYes
Product group sharedRoof DrainsTextTypeYes
Product SKU sharedzurn-z1715TextTypeYes
Region Africa sharedAllTextTypeYes
Region Antarctica sharedAllTextTypeYes
Region Asia sharedAllTextTypeYes
Region Europe sharedAllTextTypeYes
Region Middle East sharedAllTextTypeYes
Region North America sharedAllTextTypeYes
Region Oceania sharedAllTextTypeYes
Region South America sharedAllTextTypeYes
Weight Net (Kg) shared0TextTypeYes
Identity Data
Assembly CodeD2040200TextTypeYes
CostNo valuecurrencyTypeYes
Description15 Diameter Roof DrainTextTypeNoSet by a formula in the family
EAN code sharedNo valueTextTypeYes
Installation instructions sharedNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerZurn Industries, LLCTextTypeNoSet by a formula in the family
ModelZ1715-6BWTextTypeYes
Product certification sharedNo valueTextTypeYes
Product Guid shared36c10f93-8a2f-44e5-874f-5ad7cefb1971TextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
Youtube clip sharedNo valueTextTypeYes
IFC Parameters
BIMobject category sharedDrainageTextTypeYes
BIMobject category code sharedplumbing-drainageTextTypeYes
BIMobject main category sharedPlumbingTextTypeYes
BIMobject main category code sharedplumbingTextTypeYes
COBIe Type Category sharedNo valueTextTypeYes
Export Type to IFC AsNo valueTextTypeYes
IFC Classification sharedNo valueTextTypeYes
Masterformat 2014 Code shared22 14 26.13TextTypeYes
Masterformat 2014 Description sharedRoof DrainsTextTypeYes
NBS Reference Code sharedNo valueTextTypeYes
NBS Reference Description sharedNo valueTextTypeYes
OmniClass Code shared23-13 41 39TextTypeYes
OmniClass Description sharedRoof DrainsTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Uniclass 1.4 Code sharedJR1TextTypeYes
Uniclass 1.4 Description sharedDrainageTextTypeYes
Uniclass 2.0 Code sharedSS-20-75TextTypeYes
Uniclass 2.0 Description sharedRoof, Floor And Paving Drainage SystemsTextTypeYes
Uniclass 2015 Code sharedSs_30_75TextTypeYes
Uniclass 2015 Name sharedRoof, floor and paving drainage systemsTextTypeYes
Uniformat II Code sharedNo valueTextTypeYes
Uniformat II Description sharedNo valueTextTypeYes
UNSPSC Code shared30151605TextTypeYes
Materials and Finishes
Body sharedNo valueMaterialTypeYes
Material main sharedNo valueTextTypeYes
Material secondary sharedNo valueTextTypeYes
Strainer sharedNo valueMaterialTypeYes
Mechanical
CWFUNo valuegeneralTypeYes
HWFUNo valuegeneralTypeYes
WFUNo valuegeneralTypeYes
Other
ButT WeldYesYes / NoTypeYes
Plumbing
CW ConnectionNoYes / NoTypeYes
HW ConnectionNoYes / NoTypeYes
Vent ConnectionNoYes / NoTypeYes
Waste ConnectionYesYes / NoTypeYes

Category, hosting and compatibility

Revit category
Plumbing Fixtures
Catalogue classification
Plumbing › Plumbing Fixtures › Drains
Hosting
Face-based
Connectors
  • Pipe, round 150 mm, sanitary
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
1 solid form, 1 void, 5 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    1 type(s), 77 parameter(s), 1 connector(s) before and after. 7 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PLM-Roof Drain Standard-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Plumbing Fixtures.

  • Passed
    Connectors

    1 connector(s) found.

  • Passed
    Types are named

    1 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PLM-Roof Drain Standard-R25.rfa
Fingerprint
6de24a468413 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
2088 KB
History
Upgraded from the Revit 2019 format. 7 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “DN150”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.