Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Plumbing Fixtures · Tanks and filters

Septic tank 6.3 x 2.6 m, depth 3.51 m, inlet 110 mm

Library name: Septic Tank 06

ID IBIM-P-PLM-SEPTIC-TANK-06-R25 · file IBIM-P-PLM-Septic Tank 06-R25.rfa

Revit
2025
Types
1
Hosting
Not hosted (placed on a level)
Connectors
0
Revit category
Generic Models

6 checks passed, 1 warning. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

This family has one type: SEPTIC TANK 6.

Parameters of type “SEPTIC TANK 6”

25 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

1 parameter of the file for authorship or contact details (author, website, e-mail and similar) is not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Dimensions
SP IN diameter110.0mmInstanceYes
SP IN distance1555.0mmInstanceNoSet by a formula in the family
VP diameter90.0mmInstanceYes
VP OUT distance1495.0mmInstanceNoSet by a formula in the family
WP OUT diameter110.0mmInstanceYes
WP OUT distance1605.0mmInstanceNoSet by a formula in the family
General
BASE DEEP100.0mmTypeYes
BASE LENGTH6320.0mmTypeYes
BASE WIDTH2600.0mmTypeYes
Deep3510.0mmInstanceYes
TOP6700.0mmInstanceYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
DescriptionNo valueTextTypeYes
KeynoteNo valueTextTypeYes
ManufacturerNo valueTextTypeYes
ModelNo valueTextTypeYes
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Mechanical
BOP IN5090.0mmInstanceYes
BOP OUT5040.0mmInstanceYes
VBOP OUT5160.0mmInstanceYes

Category, hosting and compatibility

The Revit category differs from the catalogue classification. The library lists this family under “Plumbing Fixtures”; in a Revit project it behaves as “Generic Models” for schedules, tags, filters and visibility. This is reported for review. The family was not changed.

Revit category
Generic Models
Catalogue classification
Plumbing › Plumbing Fixtures › Tanks and filters
Hosting
Not hosted (placed on a level)
Connectors
None found
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
6 solid forms, 3 voids, 3 nested families

What was checked

6 passed, 1 warning, 6 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    1 type(s), 26 parameter(s), 0 connector(s) before and after. 28 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PLM-Septic Tank 06-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Warning
    Revit category matches the catalogue classification

    Listed under 'Plumbing Fixtures', but the family's Revit category is 'Generic Models'. It will schedule, tag and filter as Generic Models in a project. Reported for review; the family was not changed.

  • Not checked
    Connectors

    None found. This kind of family does not need one.

  • Passed
    Types are named

    1 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PLM-Septic Tank 06-R25.rfa
Fingerprint
24f43ad029af first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
472 KB
History
Upgraded from the Revit 2019 format. 28 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “SEPTIC TANK 6”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.