Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Plumbing · Plumbing Fixtures · Bathroom fixtures

Toilet Bidet Spray

ID IBIM-P-PLM-TOILET-BIDET-SPRAY-R25 · file IBIM-P-PLM-Toilet Bidet Spray-R25.rfa

Revit
2025
Types
1
Hosting
Not hosted (placed on a level)
Connectors
2
Revit category
Plumbing Fixtures

8 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

This family has one type: E11248WH.

Parameters of type “E11248WH”

74 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

9 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation0.0mmTypeYes
Dimensions
OffsetFromLevel shared785.0mmInstanceYes
Identity Data
Assembly CodeD2010100TextTypeYes
CostNo valuecurrencyTypeYes
DescriptionE100 Square Flushwise® Close Coupled Premium Toilet Pan, Horizontal Outlet,With Environmentally Friendy Water Saving Flush Of 4/2.6 Litres. Part of the Energy Range.Combine with Cistern and Seat.TextTypeYes
DSC_No valueTextInstanceYes
KeynoteN13/110TextTypeYes
ManufacturerGeberitTextTypeYes
ModelE100 Square Close Couple Premium Toilet HOTextTypeYes
Type CommentsE11248WHTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
IfcExportAs sharedNo valueTextTypeYes
IfcExportType sharedNo valueTextTypeYes
NominalDepth shared680.0mmTypeYes
NominalHeight shared785.0mmTypeYes
NominalLength shared368.0mmTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Materials and Finishes
PrimaryMaterial sharedNo valueMaterialInstanceYes
PushButtonMaterial sharedNo valueMaterialInstanceYes
SeatCoverMaterial sharedNo valueMaterialInstanceYes
Mechanical
CWFUNo valuegeneralTypeYes
HWFUNo valuegeneralTypeYes
WFUNo valuegeneralTypeYes
Model Properties
_BimSpecGuid shared0Whole numberTypeYes
_BSBibleVersion shared15Whole numberTypeYes
_CurrentRevision shared1Whole numberTypeYes
BIMObjectName sharedGeberit_E100_PremiumWC_HO_SquareWithCistern_SeatCover_E11248WHTextTypeYes
NBSDescription sharedWC pansTextTypeYes
NBSNote sharedNo valueTextTypeYes
NBSObjectName sharedGeberit - WC pansTextTypeYes
NBSOfficeMasterTag sharedn/aTextTypeYes
NBSReference shared45-35-70/384TextTypeYes
Other
AccessibilityPerformance sharedn/aTextTypeYes
AssetIdentifier sharedPlease record on commissioningTextTypeYes
AssetType sharedFixedTextTypeYes
BarCode sharedPlease record on commissioningTextTypeYes
ClassificationName sharedUniclass2015TextTypeYes
ClassificationValue sharedPr_40_20_93_94TextTypeYes
CodePerformance sharedn/aTextTypeYes
Color sharedWhiteTextTypeYes
Constituents sharedn/aTextTypeYes
DocumentationCertificates sharedn/aTextTypeYes
DocumentationInstallationGuide sharedn/aTextTypeYes
DocumentationMaintenance sharedn/aTextTypeYes
DocumentationTechnical sharedn/aTextTypeYes
DurationUnit sharedYearsTextTypeYes
ExpectedLife shared0Whole numberTypeYes
Features sharedn/aTextTypeYes
Finish sharedn/aTextTypeYes
Grade sharedn/aTextTypeYes
InstallationDate sharedPlease record on commissioningTextTypeYes
ManufacturerName sharedGeberitTextTypeYes
Material sharedCeramicTextTypeYes
ModelNumber sharedE11248WHTextTypeNoSet by a formula in the family
ModelReference sharedE100 Square Close Couple Premium Toilet HOTextTypeNoSet by a formula in the family
ProductionYear shared2018TextTypeYes
ReferencedStandard sharedn/aTextTypeYes
ReplacementCost sharedNo valueTextTypeYes
SerialNumber sharedPlease record on commissioningTextTypeYes
Shape sharedRectangleTextTypeYes
Size shared680x368x785mmTextTypeYes
SpareParts sharedn/aTextTypeYes
TypeName sharedE100 Square Close Couple Premium Toilet HOTextTypeNoSet by a formula in the family
WarrantyDescription sharedn/aTextTypeYes
WarrantyDurationLabor sharedn/aTextTypeYes
WarrantyDurationParts sharedn/aTextTypeYes
WarrantyDurationUnit sharedYearsTextTypeYes
WarrantyStartDate sharedPlease record on commissioningTextTypeYes
Plumbing
CW ConnectionNo valueYes / NoTypeYes
HW ConnectionNo valueYes / NoTypeYes
Vent ConnectionNo valueYes / NoTypeYes
Waste ConnectionNo valueYes / NoTypeYes
WasteOuletDiameter shared102.0mmInstanceYes

Category, hosting and compatibility

Revit category
Plumbing Fixtures
Catalogue classification
Plumbing › Plumbing Fixtures › Bathroom fixtures
Hosting
Not hosted (placed on a level)
Connectors
  • Pipe, round 110 mm, sanitary
  • Pipe, round 15 mm, domestic cold water
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
6 solid forms, 9 nested families

What was checked

8 passed, 5 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2019 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    1 type(s), 83 parameter(s), 2 connector(s) before and after. 0 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-PLM-Toilet Bidet Spray-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Passed
    Revit category matches the catalogue classification

    Revit category: Plumbing Fixtures.

  • Passed
    Connectors

    2 connector(s) found.

  • Passed
    Types are named

    1 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-PLM-Toilet Bidet Spray-R25.rfa
Fingerprint
01979a881b34 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
2232 KB
History
Upgraded from the Revit 2019 format. 0 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “E11248WH”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.