Picture of the family as saved in the library, model only (one fixed view). It does not change when another type is chosen.
Technical viewThe same family with its connectors, reference lines and dimension labels showing

The family editor's view: connectors, reference planes and labelled dimensions are showing.

Supports · Supports & Hangers · Pipe supports

Pipe Clamp

ID IBIM-P-SUP-PIPE-CLAMP-R25 · file IBIM-P-SUP-Pipe Clamp-R25.rfa

Revit
2025
Types
2
Hosting
Work plane-based
Connectors
0
Revit category
Pipe Accessories

6 checks passed. See what was checked

Request access How to use in Revit

Available on request. Nothing is downloaded or loaded into Revit from this page.

Types

How the types differ

3 parameters out of 51 have a different value in at least one type.

ParameterCarbon Steel, GalvanizedCarbon Steel, Plain
z Type Material21
Part Number05003616960500174107
Part DescriptionANVIL FIG. 262 SHORT STRAP, 4 IN ZINC PLATED FINISH STEELANVIL FIG. 262 SHORT STRAP, 4 IN PLAIN FINISH STEEL

Parameters of type “Carbon Steel, Galvanized”

51 parameters. Values are those saved in the library file for the selected type. An instance parameter shows its default; it is set per placed element in a project.

6 parameters of the file for authorship or contact details (author, website, e-mail and similar) are not shown.

ParameterValueUnitsScopeCan be edited
Constraints
Default Elevation48.000inchesTypeYes
z Error sharedNoYes / NoInstanceNoSet by a formula in the family
z Error Box Depth shared0.100inchesInstanceNoSet by a formula in the family
z Error Box Height shared0.100inchesInstanceNoSet by a formula in the family
z Error Box Width shared0.100inchesInstanceNoSet by a formula in the family
z Error Text sharedNot AvailableTextInstanceNoSet by a formula in the family
z Inner Diameter shared4.750inchesInstanceNoSet by a formula in the family
z Inner Radius shared2.375inchesInstanceNoSet by a formula in the family
z Mounting Hole Width shared7.125inchesInstanceNoSet by a formula in the family
z Offset shared0.000inchesInstanceNoSet by a formula in the family
z Overall Depth shared1.500inchesInstanceNoSet by a formula in the family
z Overall Height shared5.000inchesInstanceNoSet by a formula in the family
z Overall Width shared8.375inchesInstanceNoSet by a formula in the family
z Pipe Offset shared2.375inchesInstanceNoSet by a formula in the family
z Pipe Size shared4.000inchesInstanceNoSet by a formula in the family
z Thickness shared0.250inchesInstanceNoSet by a formula in the family
z Type Material shared2Whole numberTypeYes
z Visible Geometry sharedYesYes / NoInstanceNoSet by a formula in the family
Construction
Has Bolts ScrewsNoYes / NoInstanceYes
Has Lag ScrewsYesYes / NoInstanceNoSet by a formula in the family
Dimensions
Nominal Pipe Size Actual4.000inchesInstanceNoSet by a formula in the family
Nominal Pipe Size Desired4.000inchesInstanceYes
Graphics
Use Annotation ScaleNo valueYes / NoInstanceYes
Identity Data
Assembly CodeNo valueTextTypeYes
CostNo valuecurrencyTypeYes
Date Modified sharedMarch 13, 2015TextTypeNoSet by a formula in the family
DescriptionSee Part DescriptionTextTypeNoSet by a formula in the family
Equipment Abbreviation sharedPSTextTypeYes
Equipment Number sharedNo valueTextInstanceYes
Family Version shared1.0TextTypeNoSet by a formula in the family
KeynoteNo valueTextTypeYes
ManufacturerAnvil InternationalTextTypeNoSet by a formula in the family
ModelSee Part NumberTextTypeNoSet by a formula in the family
Model Disclaimer sharedContact Anvil International for More InformationTextTypeNoSet by a formula in the family
Part Description sharedANVIL FIG. 262 SHORT STRAP, 4 IN ZINC PLATED FINISH STEELTextInstanceNoSet by a formula in the family
Part Number shared0500361696TextInstanceNoSet by a formula in the family
Type CommentsNo valueTextTypeYes
Type ImageNo valueImageTypeYes
IFC Parameters
Export Type to IFC AsNo valueTextTypeYes
Type IFC Predefined TypeNo valueTextTypeYes
Materials and Finishes
Product Material sharedNo valueMaterialTypeYes
Mechanical
K CoefficientNo valuegeneralTypeYes
K Coefficient TableNo valueTextTypeYes
Loss MethodNo valueWhole numberTypeYes
Model Properties
ANSI MSS SP 69 Type shared26TextInstanceNoSet by a formula in the family
Fed Spec A A1192A Type shared26TextInstanceNoSet by a formula in the family
Fed Spec WW H 171E Type shared26TextInstanceNoSet by a formula in the family
Maximum Working Temperature shared650.00 °F°FInstanceNoSet by a formula in the family
MSS SP 58 Type shared26TextInstanceNoSet by a formula in the family
Structural
Weight shared1.900 lblbInstanceNoSet by a formula in the family
Weight Capacity shared450.000 lblbInstanceNoSet by a formula in the family

Category, hosting and compatibility

Revit category
Pipe Accessories
Catalogue classification
Supports › Supports & Hangers › Pipe supports
Hosting
Work plane-based Not hosted by a wall, floor or ceiling; it is placed on a work plane or a face.
Connectors
None found
Revit version
Saved in the Revit 2025 format. It opens in Revit 2025 and in later versions, which upgrade it on opening. Revit versions before 2025 cannot open it.
Built from
2 solid forms, 1 void, 3 nested families

What was checked

6 passed, 7 not checked. Each line says what was looked at and what was found. A passed check is not a statement that the family suits a particular project or meets a standard.

  • Passed
    Opens and saves in Revit 2025

    Opened by Revit 2025, upgraded from the Revit 2015 format, and saved without an error.

  • Passed
    No imported CAD geometry

    None found.

  • Passed
    Types, parameters and connectors kept by the clean-up

    3 type(s), 57 parameter(s), 0 connector(s) before and after. 8 unused item(s) were purged.

  • Passed
    File name follows the iBIM naming standard

    IBIM-P-SUP-Pipe Clamp-R25

  • Passed
    Preview picture made from the model

    Rendered from the family's 3D view, model only.

  • Not checked
    Revit category matches the catalogue classification

    Revit category: Pipe Accessories. No single Revit category is expected for 'Supports & Hangers'.

  • Not checked
    Connectors

    None found. This kind of family does not need one.

  • Passed
    Types are named

    2 named type(s).

  • Not checked
    Loading and placing in a project

    The family was opened on its own. It was not loaded into a project, placed or connected to a system.

  • Not checked
    Schedules and tags

    Whether the parameters report correctly in schedules and tags was not tested.

  • Not checked
    Sizes against product data

    Dimensions and performance values were not compared with any manufacturer's or standard's data.

  • Not checked
    Performance in large models

    File weight in a full project model was not measured.

  • Not checked
    Classification codes

    Uniclass, COBie or other classification data in the family was not reviewed.

File checked
IBIM-P-SUP-Pipe Clamp-R25.rfa
Fingerprint
f7f7ba8dc856 first 12 characters of the file's SHA-256
Checked on
2026-10-12
Checked with
Revit 2025 (build 25.5.0.57)
File size
476 KB
History
Upgraded from the Revit 2015 format. 8 unused items were removed when the library copy was made.

Availability and next step

Availability
On request. Our team checks each request and replies within one business day. This website has no download.
Permitted use
Not stated on this page. The terms are agreed with iBIM Group when access is given.

Request access How to use in Revit

  1. FindThe catalogue
  2. InspectThis page
  3. Select typesShowing “Carbon Steel, Galvanized”
  4. Configure a working copyNot available on the website
  5. ValidateThe checks above cover the library file only
  6. Load into RevitAn explicit step in Revit, after access

How to use a family in Revit

  1. Find and inspect. Open a family here to see its types, parameters, hosting and what was checked. Browsing this website never loads anything into a Revit project.
  2. Request access. Use Request access on the family's page. Our team checks the request and replies within one business day. No file is sent automatically.
  3. With the iBIM Revit plug-in. Open the iBIM tab > iBIM Family > Family Library, choose the family and load it into your model. A family that is already in the model is never overwritten.
  4. Without the plug-in. Load the family file we send you with Revit's own Insert > Load Family.

Families are saved in the Revit version shown on each page. Revit cannot open a family saved in a newer version.